Guides
The latest trends from Shapies!
Guides
Shapewear Size Guide: What to Do When You Are Between Sizes
You take your measurements, check the size chart, and land exactly on the line between two sizes. It happens constantly with shapewear. And because most people do not know what to do here, they pick the wrong size and spend the rest of the day uncomfortable.Here is the answer, and it is not complicated: almost always, size up.Why Sizing Up is the Right CallShapewear is compression fabric. It is designed to stretch and conform. A piece that is slightly larger than your measurements will still smooth and shape because the fabric does the work through tension, not through being so tight it has nowhere to go. Shapewear that is too small does not give you extra shaping. It gives you a waistband that digs in, fabric that rolls down, and visible lumps above and below the compression zones. None of that is what you paid for.The One ExceptionIf your measurements are very close to the lower size and you want firmer compression, some people do size down intentionally. This only works if your measurements are within about half an inch of the smaller size and you are comfortable with tighter wear for a few hours. If you are wearing it all day, do not do this. The discomfort compounds over time in a way that is hard to predict at 9am but very obvious by 3pm.What to Check Before You DecideLook at which measurement is between sizes. If it is your waist only, but your hips fit cleanly in one size, size for your hips. Hip fit is more critical in most shapewear pieces because that is where rolling and digging happens most. If both measurements are between sizes, size up, no debate.Bodysuits SpecificallyFor bodysuits, your torso length matters beyond just your measurements. If you are tall or have a long torso, always size up even if your waist and hip measurements fall neatly into a size. A bodysuit that is too short in the torso will pull down at the shoulder straps and ride up at the crotch all day. That is worse than any fit issue from going slightly larger.Still not sure? The Shapies size calculator takes your measurements and gives you a direct recommendation. No guessing required.
How to Measure Yourself for Shapewear (The Right Way)
Most shapewear problems start before you even put the garment on. Wrong size, wrong fit, wrong compression for your body. And the reason is almost always the same: people guess their size based on their clothing size, which tells you almost nothing about how shapewear will actually fit.Shapewear sizing is based on your body measurements, not the number on your jeans tag. A size 10 in denim and a size 10 in shapewear are completely different things. The sooner you accept that, the better your results will be.What You Need Before You StartGrab a soft measuring tape. The kind used for sewing, not a metal one from a toolbox. If you do not have one, a piece of string and a ruler works fine. Measure in your underwear or as close to bare skin as possible. Do not measure over clothes.The Three Measurements That MatterWaist: Find the narrowest point of your torso. This is usually about an inch above your belly button. Breathe normally, exhale, then measure. Do not suck in. Your shapewear needs to fit the real you, not the version of you holding your breath.Hips: Stand with your feet together. Find the widest point of your hips and backside, usually about 7 to 9 inches below your waist. This is where most people go wrong. They measure too high, get a number that is too small, and end up in shapewear that digs into their hips all day.Bust: Only needed if you are sizing a bodysuit or full-body piece. Measure around the fullest part of your chest, keeping the tape parallel to the floor. Do not pull it tight.How to Use Your MeasurementsOnce you have your three numbers, go straight to the size chart for the specific piece you are buying. Every brand sizes differently. Do not assume that because you are a medium in one brand you are a medium everywhere.If your measurements put you between two sizes, here is the rule: size up. Shapewear that is too small does not give you more compression. It gives you discomfort, rolling, and visible lines. Shapewear that fits correctly gives you smooth, all-day wear without you thinking about it.One More Thing Worth KnowingYour measurements can shift depending on the time of day, your cycle, and what you have eaten. If you are measuring for a specific event, measure yourself on a normal day, not after a big meal or during bloating. You want your everyday measurement, not your best-case or worst-case number.Getting this right at the start means you never have to deal with shapewear that bunches, rolls, or leaves marks. It is five minutes of work that changes how every piece fits from here on.Ready to find your size? Use the Shapies size guide with your measurements and get a recommendation in under a minute.